Omnia SDR test with WSPR

Last night i have try WSPR with my OmniaSDR, since i bouht this kit long time ago but did not success to test yet because don't have measurment. last night i manage to test by use second SDR receiver to get the signal from Omnia SDR and i found that frequency for Omnia SDR diff around +55Hz. this is impage to WSPR because it will sent out of band. So i manage to adjust and archive the target.

WSPR Signal after do some adjusted. so signal send in the band.

I used WSPR v.2.1.2  in this version i can config WSPR software to connect Omnia SDR directly by using CAT interface fith SI530 driver. you can see info as below.

WSPR V2.12 Configulation 

Omnia SDR install to enclosure

I got the cheap plastic box from electronic store near my hometown. it size can fit to Omnia SDR PCB with a litle modification (remove some screw holder).

Check Omnia SDR device in linux RaspberryPi

I used command "aplay -l" to check sound device for linux Raspberry Pi. so i can get Omnia SDR show in name "Peaberry SDR" at card number 1, device 0 and sub device 0.

This information I will use for config at WebSDR Server.

Free web space for HAM

Yesterday i try to register free web space at www.qsl.net this service is provide for free to HAM around the world. you just registered at that web site and wait 1 day to activate. after that you will get free space (but i not sure the space limit) for HTML web site . and also got free email YourCallSign@qsl.net

Prepare Omnia SDR for WebSDR

Today i got WebSDR software package from  Pieter-Tjerk, PA3FWM. I will try to setup this WebSDR server on my Rastpberry Pi.  and make them online broscast from Thailand.

Since his software is copyright metrial. so i cannot show configuration much. i will just try experiment and share as soon as i can do.